Page 8 of 27
UT
D
4000 Digital storage oscilloscope communication control software
Operating
Manual and Installation Guide
1.3 Running the software
When installation of the oscilloscope communication and control software is complete, you can run it on
your computer in two ways.
1. When installation of the oscilloscope communication and control software is complete, an short-cut
icon is automatically created on the computer desktop, as shown in Fig 1-8. To run the software,
simply double left click the icon in Fig 1-8 with your mouse.
Fig 1-8
2. Alternatively, you can run the software by going through START
→
Programme
→
Digital storage
oscilloscope
→
DSO, as shown in Fig 1-9.
Fig 1-9
Uni-Trend Technology (Chengdu) Ltd
