Page 4 of 27
UT
D
4000 Digital storage oscilloscope communication control software
Operating
Manual and Installation Guide
Chapter 1 Installation of the oscilloscope communication and
control software
1.1 Hardware requirements
Equipment requirements Minimal.
Oscilloscope
UT
D
4000 Digital Storage Oscilloscope.
Computer
Windows 2000/XP/Vista, 128 MB RAM, 16x CD-ROM or better (Vista
users please refer to its individual hardware requirements), SVGA display
or better.
Connection cable
USB A-B connection cable
1.2 Installing the software
Your UT
D
4000 Series Digital Storage Oscilloscope (“Oscilloscope”) comes with an oscilloscope
communication and control software (contained in the CD-Rom supplied with your oscilloscope)
File name : UT
D
4000 Digital storage oscilloscope communication control software
Operating
Manual and Installation Guide.
Installation :
Step one :
Insert the CD-ROM supplied with your oscilloscope into the CD-Rom drive of the
computer. Wait for the system to read and find the oscilloscope communication and control software
contents (Fig. 1-1).
Fig 1-1
Note :
1. The installation pack downloaded online must be unzipped before application.
2. The software supports Windows 2000, Windows XP and Vista operating systems. On
Vista only USB2.0 communication protocol is supported.
Step two :
Double left click the mouse to run the oscilloscope communication and control
software installation as shown in Fig 1-1.
The installation wizard for the oscilloscope communication and control software will
pop up, as shown in Fig. 1-2.
Uni-Trend Technology (Chengdu) Ltd
