Page 18 of 27
UT
D
4000 Digital storage oscilloscope communication control software
Operating
Manual and Installation Guide
Fig 2-10
After press
OK
, the parameter measurement shown Fig 2-11 display
Fig 2-11
3. Waveform refresh
Single refresh :
This is a single waveform trigger. The acquired waveform display is stored on
the display panel of the virtual control panel.
Waveform time interval setup :
To set up the time interval for waveform refresh.
4. Help
This menu shows the version of the oscilloscope communication and control software.
2.3 Control panel instructions
Keys on the control panel of the oscilloscope communication and control software (Fig 2-1)
function as follows :
Channel status :
This indicated the current control status of the digital storage oscilloscope.
Uni-Trend Technology (Chengdu) Ltd
