Page 15 of 27
UT
D
4000 Digital storage oscilloscope communication control software
Operating
Manual and Installation Guide
Print
preview :
After completing the “data transmission” or “transmission interface” task, select
“Document”
→
“print preview” to preview the waveform or interface (as the case may
be) before printing.
Waveform :
The preview waveform is the last screen of waveform data uploaded from the
oscilloscope to the communication and control software after “data transmission” is
completed, or the waveform on the computer hard disk or mobile USB device which is
downloaded to the software with the “load” function.
Depending on the number of channels working at the time of data transmission, you
can select the channel mode on the waveform preview interface with the selection
function of the menu. When uploading with two channels, you can select “single
channel” (CH1, CH2), “two channels” (CH1 & CH2, CH1 & Math, CH2 & Math) or
“all” to preview the waveform. To quit the preview screen, click the exit button.
Printing :
When “data transmission” is complete, select “Document”
→
“Print” to print the
waveform or the interface.
Waveform :
The printed waveform is the last screen of waveform data uploaded from the
oscilloscope to the communication and control software after “data transmission” is
completed, or the waveform on the computer hard disk or mobile USB device which is
downloaded to the software with the “load” function.
Exit :
After the “data transmission” or “transmission interface” task is complete, select
“Document”
→
“exit” to quit the oscilloscope communication and control software.
2. Functions
All sub-menus under the FUNCTION menu can be operated only when the “data transmission” or
“transmission interface” task is complete.
◆
Mathematics functions : When this menu is clicked, a mathematics function dialog box will pop up
to enable “mathematics selection” or “FFT mathematics”, as shown in Fig 2-2.
Uni-Trend Technology (Chengdu) Ltd
