UTD1000 User Manual
Example 3 : To request recalling and displaying a waveform saved in example 1.
1.Press [SAVE] to access the storage menu, then press [F2] to select the recall function.
2.Press [F1] to select reference waveform as the recall type.
3.Press [F2] to select internal as the save medium.
4.Press [F3] to select position 2 with the jog dial.
5.Press [F4]. The waveform will be recalled to screen when the “Loading .......” progress bar disappears.
Record
In the storage menu press [F3] to select the record function. For setup see Table 2-12.
Table 2-12 Recorder menu
Function Menu
Recorder
Replay
Load
Save
Go Back
Setup
ON
OFF
See Table2-13
USB document
(1-10)
USB document
(1-10)
Explanatory Note
Turn the waveform recording function on and off.
Playback the recorded waveform on the screen.
Import the recorded waveform document on the USB
device to the Oscilloscope.
Save the recorded waveform on the USB device.
Go back to the previous menu.
Summary of Contents for UTD1000 Series
Page 1: ...P N 110401104796X MAY 2018 REV 3 ...
Page 2: ......
Page 100: ... UTD1000 User Manual This user manual may be revised without prior notice ...
Page 101: ......
