UNI-T UTD1000 Series, Operating Manual, Page: 48 / 101

UTD1000 User Manual
Example 2 : To display all measurement values of
Channel A, follow the steps below :
1.Press [A] to select Channel A.
2.Press [SCOPE] to access the frequently used function
options.
3.Press [F2] to enter the measurement options.
4.Press [F1] to select all parameters for parameter
measurement.
All measurement parameters will be shown on screen,
as shown in Figure 2-23.
Figure 2-23 All measurement parameters
Frequency counter setup
Press [SCOPE] then [F4] to activate the frequency
counter, as shown below.
Figure 2-24 Hardware frequency counter