24
23
UT202A Operating Manual
replace the battery as soon as the battery
indicator “ ” appears.
Make sure the transformer jaw and the tets
leads are disconected from the circuit being
tested before opening the case bottom.
To replace the battery:.
1. Turn the Meter off and remove all the
connections from the input terminals.
2. Turn the Meter’s case top down.
3. Remove the screw from the battery
compartment, and separate the battery
compartment from the case bottom.
4. Remove the old battery from the battery
compartment.
5. Rejoin the case bottom and the battery
compartment, and reinstall the screw.
(figure 9)
The content is subject to change without prior notice
Summary of Contents for UT202A
Page 18: ...18 UT202A Operating Manual figure 8 ...
Page 25: ......
