UNI-T UT202A Operating Manual Download Page 2

Page: 2 / 25

UT202A Operating Manual

Overview

This Operating Manual covers information on

safety and cautions. Please read the relevant

information carefully and observe all the

Warnings and Notes strictly.

Warning

To avoid electric shock or personal injury, read

the “Safety Information” and “Rules for Safe

Operation” carefully before using the Meter.

Digital Multimeter Model UT202A (hereafter

referred to as “the Meter”) is 3 1/2 digits with

steady operations, fashionable structure and

highly reliable measuring instrument. The Meter

uses large scale of integrated circuit with double

integrated A/D converter as its core and has full

range overload protection.

The Meter can measure AC/DC Voltage, AC

Current, Resistance, Diodes, and Continuity.

Unpacking Inspection

Open the package case and take out the Meter.

Check the following items carefully to see any

missing or damaged part:

Item

Description

Qty

English Operating Manual 1 piece

Test Lead 1 pair

In the event you find any missing or damage,

please contact your dealer immediately.

Summary of Contents for UT202A


























Search results

Summary of Contents for UT202A

Reviews:

Related manuals for UT202A

Brands by name

Popular brands

UNI-T UT202A, Operating Manual

Search results

Summary of Contents for UT202A

Reviews:

Related manuals for UT202A

Brands by name

Popular brands