12
11
UT202A Operating Manual
Measurement Operation
A. DC Voltage Measurement
(see figure 3)
Warning
To avoid harms to you or damages to the Meter
from eletric shock, do not attempt to measure
voltages higher than 600V AC/DC.
To measure DC voltage, connect the Meter as
follows:
1. Insert the red test lead into the
terminal and the black test lead into the
COM
terminal.
2. Set the rotary switch to .
3. Connect the test leads across with the object
being measured.
The measured value shows on the display.
VΩ
(figure 3)
Summary of Contents for UT202A
Page 18: ...18 UT202A Operating Manual figure 8 ...
Page 25: ......
