16
15
UT202A Operating Manual
Ω
(figure 7)
2. Set the rotary switch to and press
SELECT
button to select measurement
mode.
3. The buzzer sounds if the resistance of a
circuit under test is less than 10Ω.
4. The buzzer may or may not sounds if the
resistance of a circuit under test is more than
10Ω.
Note:
When continuity testing has been completed,
disconnect the connection between the testing
leads and the circuit under test and remove
testing leads from the input terminals.
Summary of Contents for UT202A
Page 18: ...18 UT202A Operating Manual figure 8 ...
Page 25: ......
