Quick Start Guide MSO/UPO3000E Series Oscilloscope
Instruments.uni-trend.com
14 / 17
Select “Area A”:
Drawing the area of trigger area A;
Open trigger area A;
Open “trigger area” menu.
Select “Area B”:
Drawing the area of trigger area B;
Open trigger area B;
Open “trigger area” menu.
Hints: Press “drawing rectangle” icon to switch drawing rectangle and operating waveform mode. Press
“drawing rectangle” icon, if icon displays
, which presents the drawing rectangle mode is opened;
press “drawing rectangle” icon, if icon displays
, which presents the operating waveform mode is
opened. Operating waveform mode of the oscilloscope is enabled by default.
7.5 Touch Shortcut Operating
Separate two fingers and meanwhile slide two fingers to one direction, this gesture can quickly turn on/off
time measurement and voltage measurement cursor.
a.
Time measurement cursor
Slide down in vertical to directly turn on time measurement cursor as shown in Figure 11 (a);
Slide up in vertical to directly turn off time measurement cursor;
b.
Voltage measurement cursor
Slide right in horizontal to directly turn on voltage measurement cursor as shown in Figure 11 (b);
Slide left in horizontal to directly turn off voltage measurement cursor;
Note: Turn on/off cursor requires that slide distance should be
＞
3div.
(a) (b)
Figure 11
c. Quick Guide
When the oscilloscope is stop, touch and drag the T identifier to left or right around quickly, or rotate the
horizontal Position knob, a quick guide icon will displayed at the top of the screen, as shown in Figure 12. The
quick guide icon can be closed when the oscilloscope is operating. In quick guide, the oscilloscope will
