UNAOHM
38
EP2500 (Rev. 0)
NOTE: if the operating system installed in your PC is Windows95
®
, Windows98
®
or WindowsME
®
, the
PC may not be able to load some of the files automatically. Under this circumstance, supply your PC the
routing for the installation of the hardware yourself.
7.23.2
How to Use the USB Port Correctly
It is a must to connect the instrument to your PC before launching the application.
Using the USB together with the RS232 serial port is not allowed.
If you wish to switch from the USB to the RS232 port, close the application first, then disconnect the
USB cable, then connect the serial cable.
8
UTILITY ROUTINES
The utility routines are used to program the instrument for occasionally used settings (e.g. to cancel
programs) or to personalise the instrument. The routines have a tree type structure with different levels.
Access to the main menu is obtained by pressing the key
MENU (20)
and to reach the desired function
the following principles are to be followed:
•
To scroll the different menus at the same level use
UP
and
DOWN (4)
or the Shaft Encoder.
•
Once the desired menu has been located press
ENTER
or
↵
(21)
.
•
If the desired function has been reached in this mode it is possible to carry out the necessary
settings.
•
If, instead, a submenu is reached, use the multifunction keys or the Shaft Encoder to scroll them,
and then
ENTER
or
↵
to select the desired one, etc.
It is possible to return to the previous menu from any submenu by pressing
BACK
or to return to the
previous functioning mode by pressing
MENU (20)
.
The software version of the instrument is indicated on the last line of the main window of the utility
menu.
8.1
DESCRIPTION OF THE MAIN MENU AND THE SUBMENUS
Symbols used:
= Main Menu
♦
= Submenu
EXTERNAL. Activates the monitor function through the SCART socket.
CLEAR PRG. Resets the program memories.
♦
SELECTED PROGRAMS. By means of
UP
or
DOWN
it is possible to select a program and,
if necessary, cancel one by means of
CLEAR
. To exit the function press
BACK
.
♦
ALL PROGRAMS. Cancels all programs.
PRG TABLE. Shows the data stored in the programs.
VCR ON (OFF). Enables/disables the VCR modality (to analyse video recorder signals).
VIDEO FILTER ON (OFF). Enables/disables the insertion of the video filter.
AUDIO SAT MODE. Sets satellite audio.
♦
BANDWIDTH. Sets bandwidth.
♦
DEEMPHASIS. Sets deemphasis.
CONFIGURATION.
♦
MEA UNIT. Establishes the level measurement unit.
♦
BUZZER. Enables/disables the “beep” when pressed and enables the relative volume
adjustment.
♦
CRT/SOUND DEFAULT. Resets the standard brightness, contrast and volume values.
