background image

 

 

Usage Status Check Sheet (for use in Instruction Manual) 

 

* For the purpose of safety control of repair personnel, fill in within the heavy line frame and attach 

the sheet to the item of which repair is requested.   

* In case this sheet were not attached or filled in, your request of repair and service may not be 

accepted.   

* In accordance with the Private Information Protection Law, the provided information will be used 

only for determining the cause of failure and whether detoxifying washing should be conducted. It 
will never be provided to any third person.   

 
Model Name: _______________              Manufacturer’s Serial No.:________________ 

1. Inhaled Gas      * Please be sure to fill in.   

(1) Whether there is harmful effect on human bodies   

Yes        No 

 

(Sing your name below.) 

(2) Whether there is unusual smell                                   

Yes        No 

(3) Type and Name of Gas: ______________________________ 

      * Industrial Safety and Health Law designates particular substances as the materials to be 

notified.   

 
2. Usage Status 

Operation Method: Approx. (    ) hours per day, (    ) years and (    ) months 

□Continuous Operation    □Intermittent Operation   

Usage: __________________________________ 

 

3. Failure Status    □Unusual Noise    □Abnormal Pressure    □Abnormal Actuation     □Oil Leakage 

Other Symptoms: _______________________________ 

 
4. Detail of Request   

□Repair (Overhaul)    □Regular Checks 

 
5. Others: _____________________________ 

 

Company Name:                                        Personnel in charge:                                                                           

 

 

Address:                                                                                                                                                                       

 

 

Tel:                                            Fax:                                            E-mail:                                                               

   

 

Agent Name;                                                Personnel in charge:                                                                     

   

 

Address:                                                                                                                                                                       

 

 

Tel:                                            Fax:                                                                                                                           

 

 

* In case you do not have any direct transaction with us, please be sure to fill in the agent name. 

 
6. Confirmation   

The gas and substance used in this pump or unit is harmless to human bodies, or it is not 

contaminated by any substance harmful to human bodies.   

 

Signed

                                 

(seal)                  Date:                                               

 

*

 Please send the parcel to our Service Division. (See attached contact information.) 

* In order to avoid a trouble during transportation, please evacuate oil from any oil pump before 

shipping.

 

Summary of Contents for DOP-40D


























Reviews: