8
< Guidelines for Replacement and Cleaning >
Replace or clean components if performance is reduced and/or the following symptoms appear.
Cup packing:
Replace in the event of abnormal wear, hardening, or cracking.
Suction and exhaust valves:
Replace in the event of deformation, hardening, or chipping.
Bearings:
Contact the manufacturer for repair in the event of abnormal noises or
abnormal motor vibration (chattering).
Suction valve rubber separator:
Replace in the event of deformation, wear, hardening, or cracking.
Connecting tubes: Replace in the event of deformation, wear, hardening, or cracking.
Gaskets:
Replace in the event of deformation, hardening, or cracking.
Electric Wiring:
Replace in the event of cracking.
Tighten in the event of slack terminal.
Table 6.2 Locations for Maintenance and Inspection
Period of
operation
Inspection item
Inspection details
Method of
inspection
Every 3000
hours
Cup packing
Abnormal wear, hardening,
cracking.
Visual
inspection
Suction and exhaust
valves
Deformation, hardening, chipping.
Visual
inspection
O ring
Deformation, Abnormal wear
hardening, cracking.
Visual
inspection
Gaskets
Deformation, hardening, cracking.
Visual
inspection
Bearings
Abnormal noises.
Listen
Suction valve rubber
separator
Deformation, wear, hardening,
cracking.
Visual
inspection
Electric Wiring
Cracking (power cord)
Visual
inspection
Slack (terminal)
Tighten
6.4 Replacing and Cleaning Consumables
See Warning (17),(18),P05
See Caution (9),P06
See Note (13),P06
!
Warning
!
Caution
!
Note
(1) The interior of the pump is extremely hot immediately after operation. After stopping
the pump, leave it for 30 minutes or more and begin replacing consumables and
cleaning only after checking that it has cooled sufficiently.
(2) To prevent ingestion of microscopic particles in the air, use a dust mask and gloves
when replacing components and cleaning.
(3) To prevent injury, wear gloves when replacing consumables.