27
Cycle abort modes
If the cycle is aborted, the reason for the failure will be displayed.
If the operator aborts the cycle, the following screen will be displayed.
If the Level sensor is set to ON (see page 19), and the fluid drops below
the required level during operation, the cleaning cycle will stop and the
following screen will be displayed.
The
Q-Series
will not operate again until the tank is filled to the correct
level.
If the power to the ultrasonic generator should fall below a certain level
during operation, the cleaning cycle will stop and the following screen will
be displayed.
In each instance of a cycle abort, the cycle count in the Advanced Menu
will still log the cycle as complete.
