11
Screen 2: Setting the cycle time
Your
Q-Series
ultrasonic bath is factory preset with a cycle time of 15
minutes. Use this screen to amend the cycle time. Use the UP and DOWN
keys to scroll through the numbers in order to increase or decrease the
time.
When the desired cycle time has been selected, use the MENU key to move
to the next screen. The new time setting will be saved when you start the
next cycle.
Screen 3: Setting the power level
Your
Q-Series
ultrasonic bath allows the power level of the ultrasonic
activity to be adjusted. This allows the cleaning cycle to be accurately
tailored to the specific cleaning application.
Use the UP and DOWN keys to scroll through the numbers between 50 and
100%. When the desired power level has been selected, use the MENU key
to move to the next screen.
The
Q-Series
remembers the set parameters from the previous cycle. If the
operator wants to run the same cleaning cycle, it is therefore not
necessary to run through the menu each time.
