Ultrawave Neon Series, Instruction Manual

Page: 6 / 28

4
Administrator instructions
The Neon Series has a Split Level Security function. Cycle programming can only occur
in Administration mode.
To enter Administrator mode:
- Ensure the mains supply is switched off.
- Press button 4 (Enter) and button 5 (Esc) simultaneously.
- Keep both buttons depressed whilst you turn the Neon Series on at the mains
switch on the front of the unit.
Screen 1: Setting the time
The Neon Series is factory pre-set with United Kingdom time, and automatically
changes from GMT to BST on the designated days.
If the time should be incorrect, use this screen to amend it.
Use the “Up” and “Down” buttons to scroll through the numbers.
When the correct numb er has been selected, use the “Next” button to move to the next
character.
Once the correct time has been entered, press the “Accept” button to save the settings.
Button 1
Button 2
Button 3
Button 5
Button 4