Ultrawave Neon Series, Instruction Manual

Page: 4 / 28

2
Safety Instructions
Electrical
Your Neon Series must be connected to a 230Vac supply.
Unit may be supplied with either a 3-pin Plug top (BS1363) or a 3 pin 16A blue BS4343
plug. A suitably rated 230Vac supply socket should be used to supply the unit.
It is dangerous to operate your ultrasonic cleaning system without a connection to
mains earth.
Ensure that excess mains cable is stored neatly.
General use
Ensure that the tank contains liquid before you switch it on.
Always use a basket to support items to be cleaned.
Not doing so may damage the Neon Series and invalidate your warranty.
Do not place hands, fingers or other body parts in the tank when in operation.
Care should be taken when operating the ultrasonic cleaning system at higher
temperatures as external surfaces may become hot.
Consult Ultrawave before using any detergents, solutions or chemicals not approved by
Ultrawave.
Do not move the
Neon Series when it is full of water.
Read the whole of these instructions. Safety may be impaired if they are not followed.
Ultrawave will not be responsible for damage or injury caused by incorrect use of the
equipment.
WEEE Compliance
Ultrawave are complying with the WEEE regulations by contracting our obligations to a
Producer Compliance Scheme. Once it is deemed that this
Neon Series is no longer
effective, please contact Ultrawave to arrange collection by our compliance scheme
provider, who will pick up the machine from your premises.