manualshive.com logo in svg

Ultratec SUPERPRINT 4425A, Manual

Share
Download
Ultratec SUPERPRINT 4425A Manual Download Page 70

Turning off interrupt 

+

Follow these steps to turn off incoming interrupts:

1.

Press the options key (

+

). You will see PRINT (UP/LOW)

CASE on the display.

2.

Press the 

key until you see INTERRUPT (ON) on the

display.

3.

Press the 

to change the setting to OFF.

4.

Press the 

key to save the setting and leave options or

press the 

key to save the setting and go to the next

option.

Changing ASCII seek time 

+

This option is available only if you have ASCII code. Follow these
steps to change the ASCII seek time:

1.

Press the options key (

+

). You will see PRINT (UP/LOW)

CASE on the display.

2.

Press the 

key until you see ASCII SEEK TIME (3) on the

display.

3.

Type a number to change the setting to 0 or any number
between 2 and 9.

4.

Press the 

key to save the setting and leave options or

press the 

key to save the setting and go to the next

option.

Turning off the auto-answer 
relay voice announcer 

+

Follow these steps to stop auto-answer from sending out the relay
voice announcer message:

1.

Press the options key (

+

). You will see PRINT (UP/LOW)

CASE on the display.

9

Ctrl

9

Ctrl

Return

Esc

Return

9

Ctrl

9

Ctrl

Return

Esc

Spacebar

Return

9

Ctrl

9

Ctrl

68 • OPTIONS

Summary of Contents for SUPERPRINT 4425A

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands