manualshive.com logo in svg

Ultratec SUPERPRINT 4425A, Manual

Share
Download
Ultratec SUPERPRINT 4425A Manual Download Page 65

4.

Press the 

key to save the setting and leave options or

press the 

key to save the setting and go to the next

option.

Setting pulse dialing 

+

The Superprint 4425 is set for tone dialing, which is correct for
almost all telephone lines. You can, however, change the setting
to pulse dialing if your line does not accept tone dialing. This
setting remains changed until you change it again or reset the
Superprint 4425 or lose power. Follow these steps to set pulse
dialing:

1.

Press the options key (

+

). You will see PRINT (UP/LOW)

CASE on the display.

2.

Press the 

key until you see USING (TONE) DIAL on the

display.

3.

Press the 

to change the setting to PULSE.

4.

Press the 

key to save the setting and leave options or

press the 

key to save the setting and go to the next

option.

Setting the number of auto-answer
rings 

+

Follow these steps to change the auto-answer rings setting to any
number between 2 and 9 or TS:

1.

Press the options key (

+

). You will see PRINT (UP/LOW)

CASE on the display.

2.

Press the 

key until you see AUTO ANSWER RING (2) on

the display.

3.

Press the 

to change the setting to a number between 2

and 9 or TS.

4.

Press the 

key to save the setting and leave options or

press the 

key to save the setting and go to the next

option.

Return

Esc

Spacebar

Return

9

Ctrl

9

Ctrl

Return

Esc

Spacebar

Return

9

Ctrl

9

Ctrl

Return

Esc

OPTIONS • 63

Summary of Contents for SUPERPRINT 4425A

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands