Customer Service: 888-269-7477
G E T T I N G S TA RT E D
•
13
STEP 3 – Connect to your telephone service
1. Plug one end of the telephone cord into the telephone jack
labeled “Line 1” located on the back (top) edge of the
CapTel
840.
(Use the telephone cord included with your new
CapTel
840 phone.)
2. Plug the other end of the telephone cord into a telephone
wall outlet.
• Pick up the
CapTel
handset and listen for a dial tone to make sure that the
telephone service is connected properly. The Signal Meter in the lower right
corner of the display screen shows when a dial tone is present (see page 26
for details).
NOTE:
To use CapTel at the same telephone wall jack as a signaler or life line
device, please see page 103 for special set up instructions.
2-LINE MODE:
To use
CapTel
in 2-Line Mode (optional), please see Set Up
directions on page 94.
