www.ultrasport.net
GB
COMPUTER FUNCTION
KEY GUIDE
MODE
: To select functions of time, speed, distance, calories and pulse. Hold this button for 2 seconds
to go to the beginning.
HOW TO INSTALL BATTERIES
1.
Remove battery cover on the back of monitor.
2.
Place 2 AAA batteries into the battery housing ensuring they are installed correctly and replace the
cover.
3.
If the display is illegible or only partial segments appear, please remove the batteries and wait for
15 seconds before installing new batteries. Old batteries should be disposed or correctly in line with
Local Regulations.
4.
Removing the batteries will erase monitor display.
FUNCTIONS AND OPERATIONS
AUTO ON /OFF
The monitor will start up automatically if the exercise machine is in motion. If you stop
SCAN
Press “mode” key to select “scan” mode w/a “scan” sign on the upper left corner of
the Monitor. Then this function will automatically scan through all the functions and
display each value in turn in the LCD display.
TIME
Automatically accumulate workout time when starting exercise.
ODO
Monitor will display the total accumulated distance.
SPEED
Display current speed during workout time
DISTANCE
Displays distance covered during workout.
CALORIES
Displays calories burned during workout.
PULSE
Automatically detects and displays your current heart rate when exercising, press the
button until the arrow points to PULSE. The monitor will display your current pulse
rate per minute. To measure your pulse, place the palms of your hands on both of the
contact pads and the monitor will show your current pulse per minute (BPM) in the
LCD display. Note: the pulse sensor should be used as a workout guide only and is not
a medical device.
29
