ULTRASOURCE Ultravac 500 Owner'S Manual Download Page 25

Page: 25 / 84

Think

UltraSource

First

. • [email protected] • UltraSourceUSA.com

UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 USA • 800.777.5624 • 816.753.2150

4.7

MAINTENANCE

Supervisor Menu on Digital Panel (Continued)

Figure 4.6

PULSE VAC: YES

PULSE TO: 95

PULSE ON: 1.2

YES

PROGRAM

YES

PROGRAM

YES

PROGRAM

PULSE VAC allows for a more controlled
vacuuming process. Rather than simply
opening up the vacuum valve for a
continuous vacuum, the vacuum valve is
opened and closed repeatedly until the
chamber reaches the set vacuum level.
Press the MENU Key.

This is the % vacuum reached by pulsing
the vacuum valve before the vacuum valve
opens completely to fully evacuate the

chamber. The range is 99% to 20%.

Press the MENU Key.

This is how long the vacuum valve is
turned on during the vacuum cycle.
The range is from 0 to 3 seconds.
Press the MENU Key.

Summary of Contents for Ultravac 500





















































































Search results

Summary of Contents for Ultravac 500

Reviews:

Related manuals for Ultravac 500

Brands by name

Popular brands

ULTRASOURCE Ultravac 500, Owner'S Manual

Search results

Summary of Contents for Ultravac 500

Reviews:

Related manuals for Ultravac 500

Brands by name

Popular brands