ULTRASOURCE Ultravac 500, Owner'S Manual

Page: 17 / 84

Think UltraSource First . • info@UltraSourceUSA.com • UltraSourceUSA.com
UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 USA • 800.777.5624 • 816.753.2150
3.5
OPERA
TION
ALSO CORRESPONDS TO THE VACUUM
GAS IS SET TO % GAS USING THE UP
AND DOWN ARROW KEYS. THIS VALUE
GAS: 75
IF YOUR MACHINE IS EQUIPPED WITH THE GAS
PRESSING THE UP OR DOWN ARROW KEYS.
OPTION, IT CAN BE TURNED ON OR OFF BY
GAS: YES
READING INSIDE THE CHAMBER.
WHEN GAS FLUSHING TO A LOW % VACUUM.
THE RANGE IS 98% TO 30%.
IT IS RECOMMENDED TO USE PULSE VENT
PRESS THE MENU KEY.
PRESS THE MENU KEY.
NO
-
YES +
PROGRAM
NO -
YES
+
PROGRAM
Operator Menu on Digital Panel (continued)
WARNING
Explosion hazard.
Do not use a gas with an oxygen content greater than 22% with gas flush option.
If the machine is equipped with the gas
option, it can be turned ON or OFF by
pressing the UP or DOWN arrow keys.
Press the MENU Key.
GAS is set to % gas using the UP and
DOWN arrow keys. This value also
corresponds to the vacuum reading inside
the chamber. It is recommended to use
Pulse Vent when gas flushing to a low %
vacuum. The range is 98% to 30%.
Press the MENU Key.
Figure 3.5
ENTER PROGAM: 2
RUNNING PROG: 1
+
-
PROGRAM
YES
NO
+
-
PROGRAM
YES
NO
Selecting a New Program
From the Main Menu, use the UP and
DOWN arrow keys to select a new program.
Press the UP arrow to switch to Program 2
(or any of the 10 programs).
New parameters may be set for Vacuum,
Seal Time, and Gas for Program 2 (following
the procedures described in the previous
example) or simply close the lid on the
machine and run Program 2.
Figure 3.6