ULTRASOURCE Ultravac 500, Owner'S Manual

Page: 16 / 84

Think UltraSource First . • info@UltraSourceUSA.com • UltraSourceUSA.com
UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 • 800.777.5624 • 816.753.2150
3.4
OPERA
TION
OPERA
TION
VACPLUS: 4.0
SEAL: 1.2
VACUUM: 98
RUNNING PROG: 1
THAT WAS RUN WILL BE THE CURRENT PROGRAM
SHOWN IN THE WINDOW. TO SET THE OPERATING
PARAMETERS FOR THE PROGRAM SHOWN,
PRESS THE MENU KEY.
THIS IS THE MAIN MENU SCREEN. WHEN
THE MACHINE STARTS UP, THE LAST PROGRAM
NOTE: IF THE SUPERVISOR HAS SET SECURITY ON,
THESE SETTINGS CANNOT BE CHANGED
UP AND DOWN ARROW KEYS.
VACUUM IS SET TO % VACUUM USING THE
(FOR THE SPECIFIED NUMBER OF SECONDS) AFTER
THE % VACUUM SET IN THE VACUUM MENU.
THE PRESSURE IN THE CHAMBER HAS REACHED
PUMP TO CONTINUE EVACUATING THE CHAMBER
A SETTING GREATER THAN ZERO ALLOWS THE
VACPLUS MAY BE SET FROM 0 TO 20 SECONDS.
USE THE UP AND DOWN ARROW KEYS TO
THE SEAL SETTING IS IN SECONDS.
CHANGE THE SEAL TIME.
THE RANGE IS 30% TO 99%.
THE RANGE IS 0 TO 2 SECONDS.
THE RANGE IS 0 TO 20 SECONDS.
PRESS THE MENU KEY.
PRESS THE MENU KEY.
PRESS THE MENU KEY.
NO -
+
PROGRAM
YES
- NO
YES
PROGRAM
+
NO -
YES +
PROGRAM
YES
PROGRAM
+
- NO
Operator Menu on Digital Panel
NOTE: If the supervisor has set security on, these settings cannot be changed.
This is the Main Menu screen. When
the machine starts up, the last program
that was run will be the current program
shown in the window. To set the operating
parameters for the program shown press
the MENU Key.
VACUUM is set to % vacuum using the UP
and DOWN arrow keys. The range is 30%
to 99%.
Press the MENU Key.
VACPLUS may be set greater than zero
to allow the pump to continue evacuating
the chamber (for the specified number
of seconds) after the pressure in the
chamber has reached the % vacuum set
in the vacuum menu. The range is 0 to 20
seconds.
Press the MENU Key.
The SEAL setting is in seconds.
Use the UP and DOWN arrow keys to
change the seal time. The range is 0 to 2
seconds.
Press the MENU Key.