Optimized Operating Software
UP400AC DUO features the AUTO function that set the feeding current
during the process of charging or discharging. Especially for lithium
batteries, it can prevent the overcharging which may lead to an
explosion. It can disconnect the circuit automatically and alarm once
detecting any malfunction. All the programs of this product were
controlled through two way linkage and communication, to achieve the
maximum safety and minimize the trouble. All the settings can be
configured by users!
Balancing Individual Cells For Battery Discharging
During the process of discharging, UP400AC DUO can monitor and
balance each cell of the battery individually. Error message will be
indicated and the process will be ended automatically if the voltage of
any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
UP400AC DUO is adaptable to various types of lithium batteries, such
as LiPo, LiIon and the new LiFe series of batteries.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the
duration of charging, whereas 'store' state can control the final voltage
of your battery, so as to store for a long time and protect useful time of
the battery.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge
> charge is operable for battery refreshing and balancing to stimulate
the battery's activity.
Re-Peak Mode of NiMH/NiCD Battery
In re-peak charge mode, the charger can peak charge the battery
once, twice or three times in a row automatically. This is good for
making certain the battery is fully charged, and for checking how well
the battery receives fast charges.
SPECIAL FEATURES
6
