If both numbers are identical you can start
charging process. If not, press BATT TYPE/
STOP button to go back to previous screen
to recheck the number of cells of the battery
pack before going ahead.
This screen shows the real-time status during
charge process. Press BATT TYPE/STOP
button once to stop the charge process.
At this screen, you can set up the current
and voltage of the battery pack. Charging
and discharging will make the batteries
come to the voltage level of storage state.
This screen displays the number of cells you
set up and the processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the previous
screen.
If both numbers are identical you can start
charging process by press START/ENTER
button. If not, press BATT TYPE/STOP
button to go back to previous screen to
recheck the number of cells of the battery
pack before going ahead.
'STORAGE' CONTROL OF LITHIUM BATTERY
This function is for charging/discharging batteries which are not used at
once. This program is designed for charging or discharging of batteries
of specific original state. They are classified by types: 3.75V Lilon,
3.85V LiPo and 3.3V LiFe. The program will begin to discharge if the
original state of battery exceeds the voltage level of storage.
Start
Enter
Start
Enter
Batt type
Stop
>3 seconds
DEC. INC.
DEC. INC.
Number
of
cells
Charging
time
Charge
current
Supplied
capacity
Current
voltage
battery
- +
- +
LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM
16
