The screen display the real-time discharging
status. Press START/ENTER button to change
the discharging value. Press START/ ENTER
button again to store the parameter value you
set. Press BATT TYPE/STOP button to end
the program.
Battery
type
Elapsed
time Discharge
current
Battery
voltage
Discharged
capacity
PB BATTERY PROGRAM
CHARGING OF NIMH/NICD BATTERY
Start
Enter
Batt type
Stop
>3 seconds
Start
Enter
Batt type
Stop
>3 seconds
DEC. INC.
NiMH CHARGE
CURRENT 2.0A
Battery
type
- +
Elapsed
time
Charged
capacity
Battery
type
Charge
current
Battery
voltage
This program is for charging and discharging
of NiMH/NiCD batteries associated with R/C
models applications. You can press Inc. or
Dec. button to change the parameter value,
press START/ENTER button to store the
value.
The screen displays the real-time charging
status. Press BATT TYPE/STOP button to
stop the process. The audible sound indicate
the end of process.
CHARGING NIMH/NICD BATTERY IN THE AUTO CHARGE MODE
In this program the charger detects the condition of the battery which is
connected to the output and automatically charges the battery. In this
mode, you should set up the upper limit of the charge current to avoid
damage by excessive feeding current. Some batteries of low resistance
and capacity can lead to higher current in the auto charging mode.
The program is for charging of NiMH/NiCD
batteries in auto mode.
You can make it blink in the current field
and press INC. or DEC. to switch mode.
N i M H A u t o C H A R G E
C U R R E N T 2 . 0 A
Battery
type
NIMH/NICD BATTERY PROGRAM
19
