UltraPower UP400AC Duo Instruction Manual Download Page 3

Page: 3 / 32

Warning and Safety Notes........................................................................2

Introduction...............................................................................................4

Specification..............................................................................................4

Special Features.......................................................................................6

Warning and Safety Notes........................................................................8

Lithium Battery Connection Diagram......................................................10

Program Flow Chart................................................................................12

Lithium Battery(LiPo/LiFe/LiIon)Program................................................13

Charging Lithium Battery at Balance Mode............................................13

Charging of Lithium Battery.....................................................................14

'Fast' Charging of Lithium Battery...........................................................15

'Storage' Control of Lithium Battery.........................................................16

Discharging Lithium Battery....................................................................17

Pb Battery Program.................................................................................18

Charging of Pb Battery...........................................................................18

Discharging of Pb Battery.......................................................................18

NiMH/NiCD Battery Program..................................................................19

Charging of NiMH/NiCD Battery.............................................................19

Charging NiMH/NiCD Battery in the Auto Charge Mode........................19

Charging NiMH/NiCD Battery in re-peak Charge Mode.........................20

Discharging of NiMH/NiCD Battery.........................................................20

Charge/Discharge & Discharge/Charge Cycle of NiMH/NiCD Battery....21

Battery Memory Set................................................................................22

Lithium Battery Meter..............................................................................24

System Set up.........................................................................................25

Various Information During the Process.................................................27

Warning and Error Message...................................................................28

Warranty and Service.............................................................................29

TABLE OF CONTENTS

Summary of Contents for UP400AC Duo

































Search results

Summary of Contents for UP400AC Duo

Reviews:

Related manuals for UP400AC Duo

Brands by name

Popular brands

UltraPower UP400AC Duo, Instruction Manual

Search results

Summary of Contents for UP400AC Duo

Reviews:

Related manuals for UP400AC Duo

Brands by name

Popular brands