INSTALLATION ON THE ROOF
3.
Assembly with screws:
a)
Transfer the mounting points of the mounting plate to the vehicle
roof and drill the corresponding holes.
b)
Secure the mounting plate securely on the roof.
c)
Use commercially available body sealant to seal the mounting
screws.
d)
Fasten the mirror support so that the satellite dish lies horizontally
when retracted.
4.
Additional assembly with adhevis.
a)
Transfer the outline of the mounting plate to the vehicle roof when it
is screwed on.
b)
After loosening the screws, clean the marked area and the mounting
plate.
c)
Roughen the surface slightly and apply the assembly adhesive evenly.
d)
Press the system evenly onto the mounting surface.
e)
Then screw the antenna back on.
f)
Note the drying time of the adhesive used.
g)
Use commercially available body sealant to seal the mounting
screws.
h)
Remove excess adhesive residue.
Summary of Contents for MSat-65
Page 5: ...ANSCHLUSSDIAGRAMM...
Page 20: ...CONNECTION DIAGRAM...
