9
5. To install your camera on the mounting plate with heater,
use the supplied 1/4” flathead screws and nylon washer.
(See Figure 11)
NOTE:
If you are using a camera with a zoom lens, it may be
necessary to use one or both of the provided black elevation
plates to keep the camera stable. With one or both elevation
plates under the camera, insert one of the longer screws
through the bottom of the camera mounting plate, through
the elevation plate(s) and into the camera. Use the 1/4”
screw to secure the lens.
(See Figure 12)
6. Insert the cable through the compression glands, and make
all of the necessary electrical connections as described in
the instructions that accompanied the camera. Be sure that
the compression glands are firmly fixed.
(See Figure 11)
FIGURE 11
FIGURE 12
