Installation and Maintenance Manual
ULTRAFLEX
E
N
G
L
ISH
HYDRAULIC CYLINDER FOR OUTBOARD ENGINE
-
page 15
of 83
3.4 Hose installation
Screw the hoses on the cylinder fittings with a torque of 20[Nm] (15[lb
·
ft]) according to the following instructions:
-
minimum hose bend radius 250 mm;
-
no interference during engine tilting;
-
no interference with the transom;
WARNING
An excessive hose bend could result in its internal breaking which
will cause a bad operation of the system. In this case it is necessary
to replace the damaged hose.
NO
min. b
end
radiu
s 250
mm
PORT ENTRY
(P)
STARBOARD ENTRY
(S)
