Installation, Maintenance and Owner's Manual
ULTRAFLEX
page 16
of 143-
POWER ASSISTED STEERING SYSTEM
E
N
G
L
ISH
STANDARD PACKAGING CONTENTS:
MD KIT - FRONT MOUNT APPLICATION:
n° 1 helm (with the same cylinder capacity as the Master helm; UHD32-F or UHD40-F or UHD50-F according
to the Master helm)
n° 2 flanges for fixing to the dashboard
n° 4 screws for fixing to the dashboard
n° 4 spacers (not supplied for 50cc helms)
n° 8 washers
n° 4 self-locking nuts
n° 1 plastic cover
n° 4 screws for cover fixing
n° 1 key for steering wheel fixing
n° 1 stainless steel washer for steering wheel fixing
n° 1 stainless steel self-locking nut for steering wheel
fixing
n° 1 helm shaft seal
n° 1 dashboard seal
n° 1 user interface
n° 4 stainless steel nuts for fixing to the dashboard
n° 4 stainless steel washers
n° 1 seal
MD KIT - TILT APPLICATION:
n° 1 helm (with the same cylinder capacity as the Master helm: UHD32-T or UHD40-T or UHD50-T according to the
Master helm)
n° 1 litre of hydraulic oil OL 150
ULTRAFLEX
n° 1 Slave helm communication cable
n° 1 straight fitting
n° 2 "T" fitting
ORDER SEPARATELY:
n° 1 OB-MD kit whose length corresponds to the distance between the Master helm and the Slave helm
n° 2 Kit OB-SVS
NOTICE:
cylinders and hydraulic hoses (OB-SVS kit and OB-MD kit) are ordered and packed separately
(see the relevant installation manuals).
2.2.2 Dual station packaging contents
NOTICE:
The Slave helm is identified by a PVC disc to be removed during installation only.
NEVER use the Slave helm as single station since it is not equipped with proper safety systems. Refer to the
installation diagram!
A wrong installation will prevent the system from operating properly!
DANGER
