TRANSMITTER PROGRAMMING
SYSTEM PROGRAMMING -
Menu 1
PAGE 28
95 SERIES
INSTALL MANUAL
TRANSMITTER PROGRAMMING
THE SYSTEM CAN LEARN UP TO 4 REMOTE TRANSMITTER. EACH REMOTE MUST BE
PROGRAMMED TOGETHER DURING THE SAME SEQUENCE. FOR SECURITY
REASONS ALL PREVIOUSLY PROGRAMMED TRANSMITTER WILL BE DELETED FROM
MEMORY.
CYCLE THE IGNITION KEY- ON/OFF ON/OFF ON
(LEAVE THE KEY ON)
ENTERING TRANSMITTER PROGRAM MODE
PRESS AND HOLD THE PROGRAM SWITCH. THE PARK LIGHTS WILL
TURN ON AND THE HORN WILL CHIRP 1 TIME.
CONTINUE TO HOLD THE PROGRAM SWITCH.
1 CHIRP CONFIRMS ENTERING PROGRAM MODE.
5 CHIRPS CONFIRMS TRANSMITTER PROGRAM MODE.
PRESS AND RELEASE THE LOCK BUTTON ON EACH ON THE
REMOTE’S TO BE PROGRAMMED
THE PARK LIGHTS WILL FLASH AND THE HORN WILL CHIRP EACH
TIME A NEW REMOTE CODE IS PROGRAMMED.
TURN THE KEY OFF TO EXIT PROGRAM MODE.
PROGRAMMING THE REMOTE’S
SYSTEM PROGRAMMING -
Menu 1
PAGE 29
95 SERIES
INSTALL MANUAL
FAULT CODES
BRAKE FAULT
THIS FAULT WOULD OCCUR IF
THE BRAKE THERE WAS AN
ISSUE WITH THE BRAKE
CIRCUIT.
FAULT CODE VIA PAGER
IF THE STARTER FAILS TO START THE REMOTE WILL DISPLAY A FAULT CODE ON THE
LCD DISPLAY. THE TEXT “FAULT” WILL BE FOLLOWED BY THE INPUT OR CONDITION
THAT IS CAUSE THE ISSUE
UL
TRA
FAULT
1
UL
TRA
BRAKE
1
TOGGLE
HOOD FAULT
THIS FAULT WOULD OCCUR IF
THE HOOD WAS OPENED OR
THE HOOD SWITCH IS BROKE
OR OUT OF ALIGNMENT.
UL
TRA
FAULT
1
UL
TRA
HOOD
1
TOGGLE
TACH FAULT
THIS FAULT WOULD OCCUR IF
THE VEHICLE HAD A START
ISSUE SUCH AS A DEFECTIVE
BYPASS MODULE.
UL
TRA
FAULT
1
UL
TRA
TACH
1
TOGGLE
VALET FAULT
THIS FAULT WOULD OCCUR IF
THE SYSTEM WAS IN VALET
AND YOU PRESSED START.
UL
TRA
FAULT
1
UL
TRA
VALET
1
TOGGLE
RANGE FAULT
THIS FAULT WOULD OCCUR IF
THE USER WAS OUT OF
OPERATING RANGE.
UL
TRA
FAULT
1
UL
TRA
RANGE
1
TOGGLE
