SETS OPTION 1 –TWO PRESSES-
Press and release the start button two times to
activate the remote starter.
SETS OPTION 2 – ONE PRESS-
Press and release the start button one time to
activate the remote starter.
SETS OPTION 3 – NEGATIVE PARK LIGHT- Negative output for park light flash
feature. (DEFAULT)
SYSTEM PROGRAMMING -
Menu 1
PAGE 22
95 SERIES
INSTALL MANUAL
PROGRAM MODE
CHANGE SETTING 6 -
GOTO SETTING 7 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 6- REMOTE STARTING
THE SIREN WILL CHIRP 6 TIMES WHEN SETTING 6 IS SELECTED
6 CHIRP
PRESS
1 TIME
6X
1 CHIRP
2 CHIRP
3 CHIRP
SETS OPTION 1 –LEDS OFF-
No LED flashes when the doors are locked/armed.
SETS OPTION 2 – LED FLASH- The LEDs flash when the doors are lock/ armed.
CHANGE SETTING 7 -
GOTO SETTING 1 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 7- LED FLASHES
THE SIREN WILL CHIRP 7 TIMES WHEN SETTING 7 IS SELECTED
7 CHIRP
PRESS
1 TIME
7X
1 CHIRP
2 CHIRP
SYSTEM PROGRAMMING -
Menu 1
ENTERING PROGRAM MODE 4
ON/OFF - ON/OFF - ON
(Leaving the key ON)
IGNITION KEY
PROGRAM SWITCH
1 CHIRP
Confirming
Program Mode
SIREN CHIRP
REMOTE BUTTON
Press Status
Button to
Select Menu 4
Press and release 1 time
SETTING 1- TACH OPTIONS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
1 CHIRP
PRESS
1 TIME
1X
CHANGE SETTING 1 -
GOTO SETTING 2 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – HYBRID 1-
The remote starter will ignore the Tach input after the
remote start activates.
1 CHIRP
SETS OPTION 2 – HYBRID 2-
No Tach Learn required. The starter output will stay on
for 2 seconds then the remote starter will stay running for the programmed runtime.
2 CHIRP
SETS OPTION 3 –AUTO TACH LEARN- The system will automatically learns the
vehicles Tach. Tachless on TL Models. (DEFAULT)
3 CHIRP
SYSTEM PROGRAMMING -
Menu 1
PAGE 23
95 SERIES
INSTALL MANUAL
PROGRAM MODE
1 CHIRP
CHANGE SETTING 2 -
GOTO SETTING 3 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 2-ADJUST FOR UNDER-CRANK
THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
2 CHIRP
PRESS
1 TIME
2X
1 CHIRP
Each time the HORN/ SIREN chirps the Tach setting is reduced by 10%
SETS OPTION 1 – 300ms-
The system will wait 300ms before starting to monitor the
Tach input.
Each time the HORN/ SIREN chirps the Tach setting is increased by 10%
SETS OPTION 2 – 750ms-
The system will wait 750ms before starting to monitor the
Tach input.
SETS OPTION 3 – NO WAIT- The system will monitor the Tach as soon as the
vehicle has remote started. (DEFAULT)
1 CHIRP
2 CHIRP
3 CHIRP
CHANGE SETTING 4 -
GOTO SETTING 5 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 4- TACH WAIT
THE SIREN WILL CHIRP 4 TIMES WHEN SETTING 4 IS SELECTED
4 CHIRP
PRESS
1 TIME
4X
1 CHIRP
2 CHIRP
3 CHIRP
1 CHIRP
CHANGE SETTING 3 -
GOTO SETTING 4 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 3-ADJUST FOR OVER-CRANK
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
3 CHIRP
PRESS
1 TIME
3X
1 CHIRP
SYSTEM PROGRAMMING -
Menu 1
PROGRAM MODE 4
SETS OPTION 1 –FORTIN-
Operation of Fortin bypass modules.
SETS OPTION 2 – IDATA- Operation of IDATA bypass modules.
CHANGE SETTING 5 -
GOTO SETTING 1 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 5- BYPASS SELECTION
THE SIREN WILL CHIRP 5 TIMES WHEN SETTING 7 IS SELECTED
5 CHIRP
PRESS
1 TIME
5X
1 CHIRP
2 CHIRP
TIP- FOR FORTIN BYPASS MODULES CONNECT THE POWER TO THE REMOTE STARTER WITH THE BYPASS
MODULE CONNECTED TO SET FOR FORTIN.
