SYSTEM PROGRAMMING -
Menu 1
PAGE 18
95 SERIES
INSTALL MANUAL
PROGRAM MODE
CON'T FROM PREVIOUS PAGE
1 CHIRP
2 CHIRP
3 CHIRP
CHANGE SETTING 8 -
GOTO SETTING 9 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 8- PASSIVE ARMING
THE SIREN WILL CHIRP 7 TIMES WHEN SETTING 7 IS SELECTED
8 CHIRP
PRESS
1 TIME
8X
1 CHIRP
2 CHIRP
CHANGE SETTING 9 -
GOTO SETTING 1 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 9- SHOCK & AUX SENSOR
THE SIREN WILL CHIRP 9 TIMES WHEN SETTING 9 IS SELECTED
9 CHIRP
PRESS
1 TIME
9X
SETS OPTION 1 – PASSIVE ARMING ENABLED-
The alarm will automatically arm
30 seconds after the last door is closed.
SETS OPTION 2 – PASSIVE REARM-
The alarm will automatically arm 30 seconds
after unlock is pressed..
SETS OPTION 3 – PASSIVE ARMING DISABLED-
The alarm will not
automatically. Must be armed by the remote.
(DEFAULT)
SETS OPTION 1 – INTERNAL DISABLED-
The Internal Sensor input will be Active
not be monitored when the alarm is armed.
SETS OPTION 2 – AUX DISABLED-
The Auxiliary Sensor input will be Active not be
monitored when the alarm is armed.
*ALARM MODELS ONLY
1 CHIRP
2 CHIRP
CHANGE SETTING 7 -
GOTO SETTING 8 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 7- PASSIVE LOCKS
THE SIREN WILL CHIRP 8 TIMES WHEN SETTING 8 IS SELECTED
7 CHIRP
PRESS
1 TIME
7X
SETS OPTION 1 - PASSIVE LOCK DISABLED- The doors will not lock when
Passive Arming sets the alarm.
SETS OPTION 2 – PASSIVE LOCK ENABLED- The doors will lock when Passive
Arming set the alarm. (DEFAULT)
*The door pin connection must be made for passive arming to operate on the 3295 series.
3 CHIRP
SETS OPTION 3 – ENABLED- The Shock Sensor and Auxiliary Sensor input will
be Active when the alarm is armed. (DEFAULT)
SYSTEM PROGRAMMING -
Menu 1
PAGE 19
95 SERIES
INSTALL MANUAL
PROGRAM MODE
1 CHIRP
1 CHIRP
2 CHIRP
CHANGE SETTING 1 -
GOTO SETTING 2 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 1- VALET SETTINGS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
1 CHIRP
PRESS
1 TIME
2 CHIRP
1 CHIRP
1X
CHANGE SETTING 2 -
GOTO SETTING 3 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 2-PARK LIGHT OUTPUTS
THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
2 CHIRP
PRESS
1 TIME
2X
SETTING 3-HORN OUTPUT
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
3 CHIRP
PRESS
1 TIME
3X
CHANGE SETTING 3 -
GOTO SETTING 4 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
2 CHIRP
3 CHIRP
CON'T ON NEXT PAGE
SETS OPTION 1 – 30 SECOND-
The park light output will flash for all functions and
will stay active for 30 seconds when unlock is pressed.
SETS OPTION 2 – NORMAL OPERATION- The park lights will flash for all
functions. (DEFAULT)
SETS OPTION 1 – SECURE-
The LED/ Program Switch must be held for 15 seconds
to place the system into Valet Mode.
SETS OPTION 2 – STANDARD- The LED/ Program Switch must be held for 5
seconds to place the system into Valet Mode. (DEFAULT)
SETS OPTION 1 – SHORT OUTPUT-
The HORN output will activate for 5ms when a
function is preformed.
SETS OPTION 2 –
LONG OUTPUT-
The HORN output will activate for 50ms when a
function is preformed.
SETS OPTION 3 – NORMAL OUTPUT- The HORN output will activate for 10ms
when a function is preformed. (DEFAULT)
SYSTEM PROGRAMMING -
Menu 1
ON/OFF - ON/OFF - ON
(Leaving the key ON)
IGNITION KEY
Press and release 1 time
PROGRAM SWITCH
1 CHIRP
Confirming
Program Mode
SIREN CHIRP
ENTERING PROGRAM MODE 2
Press UNLOCK
Button to
Select Menu 2
REMOTE BUTTON
