PAGE 9
INSTALL GUIDE
Wiring Descriptions
AUXILIARY CONNECTOR (14 pin)
Pin Function
Description
1-YELLOW
Re-arm(-)
-
0.75 second pulse output when button is
pressed and after remote start shutdown.
Used for factory alarm re-arm.(menu 3)
2-RED/
Trunk Release(-)
- Programmable output. Hold the button
WHITE
for 3 seconds, output will stay active (max
5 seconds) or programmable (-)park light.
3-BROWN
Dis-arm(-)
- 0.75 second pulse when the
button is pressed
and before remote starter activation.
Used for factory alarm dis-arm.
4-ORANGE
Anti-Grind/Starter Kill(-)
-Output active during remote start.
Programmable Starter Kill (menu 3)
5-WHITE/
Horn(-)
- Output to activate factory horn. (12xx/32xx series)
or
BLUE
Siren(+)
-
Output to activate external siren. (22xx/42xx series)
6-N/A
7-PURPLE
Door Pin(+)
- Input to detect 12v when door is open.
8-WHITE
Park Light(+)
- 10amp positive output to activate park lights.
Programmable output (menu 2)
9-GREEN/
Hood Pin(-)
- Input to detect ground when hood is open.
WHITE
MUST BE CONNECTED.
10-GREEN
Door Pin(-)
-Input to detect (-) when door is open.
11-BLACK
Ground(-)
- System chassis ground input.
12-PINK
Brake Light (+)
- Positive brake light switch input. Used to
detect the brake switch being applied
.
13-BLUE/
Tach(A/C)
- A/C Tach signal input. Used to detect engine
WHITE
speed to indicate vehicle is running.
(Coil, Injector, cam/crank position sensors)
14-BLUE
/-)
- Programmable Wait to Start Input. Detects 12v or
negative signals.(menu 3)
