PAGE 11
INSTALL GUIDE
Step 1 - Connect All Of the Following Wires
Main Connector
(6pin)
YELLOW
Starter Output
- 12volts during start position only.
GREEN
Heater/Acc Output
- 12volts in the accessory position off during
start and 14volts during run.
RED
12volt 30amp Input
- 12volts from ignition harness or battery.
RED
12volt 30amp Input
- 12volts from ignition harness or battery.
BLUE
Ignition Output
- 12volts in the ignition, start and run positions.
WHITE*
Selectable Output
- Selectable Output for vehicles that may
require a 2nd Ignition, Accessory or Start.
Auxiliary Connector
(14pin)
BLACK
System Ground Input
- Connect to Chassis Ground.
WHITE
Park Light Output
- Connect to Park Light system.
GRN/WHT
Hood Pin Input
- Connect to the Hood Pin Safety Switch.
BLUE/WHT
Tach Input
- Connect to A/C Tach source. (Above 2 volts AC)
PINK
Brake Switch Input
- Connect to 12volts when the brake
pedal is applied.
BLK/WHT**
Park Brake Switch
- Connect to Park Brake
GREEN***
or
Door pin Input
- Connect to (-) wire when door open
PURPLE***
Door pin Input
- Connect to (+) wire when door open
*
See jumper selector position (page 7).
**MUST BE CONNECTED.
***Connect only ONE of the door input wires.
