INSTALL GUIDE
PAGE 20
Setting 1 Special Door Lock/Unlock Operations
(Factory Alarm Rearm)
.
1) Type 1 1 Flash/Chirp Unlock before start. Lock pulse after start and shutdown.
2) Type 2 2 Flashes/Chirps Lock pulse ONLY after remote start shutdown.
*3) Type 3 3 Flashes/Chirps Default Lock/ Unlock Pulses.
Press & Release the Program Button 1 Time
(Setting 1) Confirmed with 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 2 Gas/Diesel Mode
(14 pin auxiliary connector, pin 14)
1) (-) Input 1 Flash/Honk (-) Glow Plug input. Waits maximum 30 seconds.
2) Time Delay 2 Flashes/Honks Waits for approximately 15 seconds.
*3) Gas/ (+) Input 3 Flashes/Honks Waits 2 seconds if no diesel input is detected.
Press & Release the Program Button 2 Times (Setting 2)
Confirmed with 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step
.
Setting 3 Rearm Output
(14 pin auxiliary connector, pin 1)
1) Type 1 1 Flash/Chirp Pulse after start and with lock.
2) Type 2 2 Flashes/Chirps Pulse after start only.
*3) Factory Re-arm 3 Flashes/Chirps Pulse with lock and after starter shutdown.
Press & Release the Program Button
3 Times (Setting 3) Confirmed with 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 4 Run Time
1) 4 Minutes 1 Flash/Chirp Runs for approx. 4 minutes when activated.
2) 45 Minutes 2 Flashes/Chirps Runs for approx. 45 minutes when activated.
*3) 15 Minutes 3 Flashes/Chirps Runs for approx. 15 minutes when activated.
Press & Release the Program
Button 4 Times (Setting 4) Confirmed with 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
*(Default Settings)
Menu 3- Starter Settings
Press and
Release the
button for
Menu 3
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and Hold
the Program Button
to Change Option
Press and Release
the Program Button
Number of Times for
the Setting Chosen
