18
Regenerant Line Connection
Rev B
Regenerant Line Connection
(not used with 3-cycle filter system)
The regenerant line from the tank connects to the valve. Make the
connections and hand tighten. Be sure that the regenerant line is secure
and free from air leaks. Even a small leak may cause the regenerant line to
drain out, and the conditioner will not draw regenerant from the tank. This
may also introduce air into the valve causing problems with valve
operation.
Figure 8
Regenerant Connection for
Performa Valve
An aircheck must be used in the regenerant line when installing a
Performa valve.
NOTE:
When installing a 3-cycle filter (273 valve) use a cap on the regenerant
line connection to prevent water seepage from the port. See
Parts and
Accessories
section for part number.
Regenerant Line Connection
NOTE:
Be sure to use a 3/8" NPT plumbing
connection when attaching regenerant line to the
Performa valve.
