Ultimate Jets
- Diamond assembly manual - Revision 4 - 01/01/2015
10
Locate the steering servo mount accessories bag and open.
Install the servo bracket on the side of the trunion as shown on the picture below. The two socket head
screws will require firm fastening to ensure that the bracket does not move when the servo is operating.
Install the brass ball on up most the set screws holes of the strut and insert the strut into the shear pin.
Fasten with thread lock and install the other set screws to secure the strut.
The servo bracket is set for standard JR servo size of 39.8 mm. For Futaba standard servo, you will have to
trim the bracket by 0.2 mm. Use an electric file or a tungsten carbide rotary file for this job.
Once the servo is installed, setup the pushrod by installing the two ball links on the threaded rod and
trimming it to the appropriate length.
