Before use, remove all protective parts from
the robot and charging station.
1. Assemble the pads.
3. Assemble power cord for charging station.
4. Charge Robot.
2. Set up the charging station.
The Charging Station is designed to
automatically empty and charge the Robot.
Place on a flat, hard surface at least 0.2 feet
(6cm) away from the wall. Ensure that there is
a clear space in front and on both sides so
that your Robot can return to Station to
recharge and empty.
Note:
The charging station must always be
connected to the power supply. Avoid using
power supplies that may be accidentally
turned off (e.g. power strips, outlets
controlled by light switches, GFCI).
PRODUCT OPERATION
Before Using
0.2 feet(6cm) away from the wall
2 feet(
0.6m)
2 feet(
0.6m)
5ft/1.5m
Summary of Contents for T10 PRO
Page 1: ...Model T10 PRO USER MANUAL...
Page 2: ......
