USING THE SYSTEM
1.
Pull hose down and hold handle at waist level. The hose will automatically lock into place.
2.
Turn the system on using the on/off switch inside the valve to begin vacuuming. The system can be used to
vacuum dry messes. Optional attachments may be used on the hose end to meet various cleaning needs.
STORING THE HOSE
1.
With the system on, unlock the hose by grabbing it approximately 8-inches from the valve and rotate the
hose to the left until it releases.
2.
Partially cover the handle end with hand to retract the hose.
3.
Once fully retracted, push the handle end onto the rubber ball and the system will automatically turn off.
OPERATING INSTRUCTIONS
1
2
1
2
3
H-P Products, Inc. • 512 W. Gorgas St., Louisville, Ohio 44641 • www.reachfortheclean.com • 80267 • 02/20
Attention Installer:
Please be sure this instruction sheet and warranty information are left with the customer when installation is complete.
On/Off
Switch
