Ultenic T10 PRO User Manual Download Page 4

SAFETY WARNING

IMPORTANT SAFETY INSTRUCTIONS FOR 
HOME USE ONLY

Basic precautions should always be observed 
when using any electrical equipment, including 
the following:

WARNING: READ ALL SAFETY INSTRUCTIONS 
AND THE ENTIRE MANUAL. 

Failure to heed the 

warnings and instructions may result in electric 

shock, fire, or serious injuries. Please read all 
instructions before using this robot.

WARNING:

·

This robot is intended for children 8 years of 

age and older. People with reduced physical, 

sensory, or intellectual abilities, or those who 
lack experience and knowledge, should be 
supervised or instructed in safely using the 
robot; they must also be aware of possible 

hazards. Children should not play with this 
robot. Cleaning and user maintenance should 

not be performed by children without 

supervision.

·

The robot must be used in accordance with 

the instructions in this manual. The company 
is not responsible for any damage or injury 
caused by improper use.

To reduce the risk of injury or damage, please 
observe the following safety precautions when 
installing, using and maintaining the robot:

·

Please read all instructions regarding safety 

and operation before using the robot.

·

Keep the safety and user manual for future 

reference. If you accidentally lose the manual, 

you may visit the official website to download 

the electronic version. 
(https://www.ultenic.com).

·

Heed all warnings on the robot, battery, 

charging station, and user manual.

RESTRICTIONS

·

This robot is for indoor use only. Do not use it 

outside, or in commercial and industrial 

environments.

·

Before using the robot, remove fragile items 

such as clothing, loose-leaf paper, rope or 

curtains, and power cords from the floor. The 
robot may snag onto an object, table, or shelf 
if it gets stuck on a cable.

·

This robot is not a toy. Do not sit or stand on 

this robot. Children and pets should be 
supervised while the robot is operating.

·

Store and operate the robot at room 

temperature.

·

Do not use this robot to clean anything that is 

burning or smoking.

·

Do not use the robot to clean bleach, paint, or 

other chemicals, or anything wet.

·

If the cleaning area involves a balcony, a 

physical barrier should be set up to prevent 
the robot from accessing the balcony and 

ensure it operates safely.

·

People (including children) with reduced 

physical, sensory, or intellectual abilities, or 
those who lack experience and knowledge, 
should be supervised or instructed in safely 

using the robot.

         Follow all operating and usage instructions. 

The product's labels or packaging indicate that: 

Do not dispose of the electrical appliances as 

unsorted waste or, use a separate waste 

collector. 

Contact your local authority for information on 
the appropriate disposal method. If electrical 

appliances are discarded in landfills, hazardous 
substances can leach into groundwater, enter 

the food chain, and damage people's health. 
Contact your local or regional waste 

management agency for more information on 

their recycling and reuse programs.

·

Children should be supervised to ensure they 

do not play with the robot. Further, cleaning 
and maintenance must not be performed 
without adult supervision.

·

Do not place anything on the robot.

·

Please note the robot will move on its own. Try 

to be careful when walking in the operating 

area to avoid stepping on it.

·

Do not operate the robot in an area where a 

ground power outlet is exposed.

Summary of Contents for T10 PRO























Reviews: