UL Keepsafer SSD Owner'S Manual Download Page 36

Page: 36 / 40

18. ADDITIONAL SYSTEM ACCESSORIES

NOTE: Use only

KEEPSAFER SSD

accessories with

this system. Installation instructions are
provided with each accessory.

BACKUP BATTERY

Highly recommended accessory.

Powers Console if AC power fails.

At least 6 hours backup time.

Fits inside Console.

Recharges automatically.

3 to 4 year battery life.

Battery rated 12 volts, 1.2 AH

DOOR/WINDOW SENSORS

Can be used for instant or delayed
response.

Used to protect vulnerable doors,
windows, gun cabinets, etc.

Contains built-in magnetic switch.

Can connect to external magnetic
switch contacts.

Can connect to external glass break
sensor.

ONE-BUTTON REMOTE CONTROL

Arms and disarms system.

Comes with a snap-action key chain.

TWO-BUTTON REMOTE CONTROL

Left button arms and disarms system.

Right button activates the Console’s
Home Automation Output.

Pressing both buttons triggers the
Console’s emergency alarm. (Not to be
used as a UL Listed Medical Alert
System.)

Comes with a snap-action key chain.

UL NOTE: Product not tested by UL.

EXTERNAL SIREN

Alerts occupants and neighbors with
loud siren.

Wires to Console.

Siren is weather-resistant.

Up to two external sirens can be used
with the Console. (Only one external
siren is allowed in UL installations.)

36 OF 40

MANUAL,OWNERS,DF-16K

Linear P/N: 210771 C

Material: 20# White Mead Bond with 60# White Coated Cover

Ink: PMS 554 (Dark Green)

Size: 8.500" x 5.500"

Scale: 1-1

Summary of Contents for Keepsafer SSD








































Search results

Summary of Contents for Keepsafer SSD

Reviews:

Related manuals for Keepsafer SSD

Brands by name

Popular brands

UL Keepsafer SSD, Owner'S Manual

Search results

Summary of Contents for Keepsafer SSD

Reviews:

Related manuals for Keepsafer SSD

Brands by name

Popular brands