9
Switching point time of the Relay contacts (CV 125, 126)
The switching point time for the relay change-over can only be set for the first
address in each servo output. The switching point time for the second address is
always in the middle of the servo movement.
The values in the CV 125 and CV 126 have the following meaning:
0 = switching point time in the centre of the movement
1 = switching point time at the servo “red” end position
2 = switching point time at the servo “green” end position
CV125 (135, 145, 155): Switching point time with switching command “red” for
outputs 1-4
CV126 (136, 146, 156): Switching point time with switching command “green” for
outputs 1-4
Technical Data
Switch addresses:
2
Address range:
1-2048
Digital format:
DCC, Motorola
Servo output:
each 700mA
Total load:
700mA
Relay contacts:
3A
Accessories
Transformer 70VA Part No. 20070
with an output potential of 16V~ and maximum current of 4.3A.
Mini Servo
*)
Part No. 81410
Used in small spaces, i.e. for situations which don’t require a large torque.
Size 20.0 x17.6 x 8.0mm, Torque 4Ncm.
