User Manual |
7
EN
A- THINGS THAT MUST BE DONE BEFORE USING YOUR PRODUCT
AND SECURITY WARNINGS
WARNING!
• Do not place your product to a place exposed to direct sunlight or influence area of the heat
sources such as stove, radiator core, oven, cooker, radiant and infrared. Otherwise, this may cause
performance decrease, damage of your product or make it become dysfunctional (Picture 1).
• Your product is set for operating at mains power of 220-240V/ 50-60 Hz, 110-127/60 Hz Using your
product with a different voltage may cause it become dysfunctional and fire (Picture 2).
• Our company is not responsible for the failures and material damages that may occur in case of
using without grounding.
• Electrical installation must conform to national regulations.
• There must absolutely be a residual current relay and a fuse in your electrical installation for
preventing the risks of electrical shock and fire.
• Place the device in a damp-free place with unobstructed air circulation.
• You must clean inside your product before the first use.
• After placing your device to its place, wait for one (1) hour without moving it before starting using.
• If your device is installed under very cold weather conditions, then the waiting period must be at
least two (2) hours before starting to operate it.
• In case of prolonged blackouts, do not open the door of your products for preventing heat loss.
• If you do not use your device or leave it empty for a short time, do not unplug it for saving energy.
Otherwise, more energy will be consumed for re-cooling your product.
• In products, the doors of which are left opened or opened and closed continuously, frost deposit
will increase and no cooling operation will be carried out. Thus open the doors of your product
only when needed. Make sure that the doors are closed if not required.
• Unplug your product in case of sudden blackouts. For starting again, plug in your product 20
minutes after the electricity is supplied. High voltage occurring at the moment of electricity supply
may cause damage of your product and fire.
• Do not allow wild animals and pets to enter into your product or walk around it. It may damage
your product or cause death and injury of the animals. Furthermore, wild animals and pets may
cause fire by giving harm to the electrical installation.
• Your device does not have any sterilizing effect on the microorganisms. Therefore it is necessary
that the foodstuff you place into your product must conform to the hygiene standards and
packaged. Otherwise, microorganisms reproducing in foodstuff may pose a threat for your health.
PICTURE 1
PICTURE 2
220-240V/ 50-60 Hz,
110-127/60 Hz
