| User Manual
20
EN
D- USING YOUR PRODUCT
General Informatıon and Instructıons
Keys;
1
-
[
]
:
Press and release, increases the sliding options among menu options and enables
transition.
2-
[
]
/Light:
Internal menu status, reduces sliding values among menu options or enables
transition. When you press for 5 seconds, the Light turns on/off.
3-
[
]
/(Esc):
Press and release, return to the previous menu and approval of
parameter values. When you press at least for 5 seconds, all the functions are
turned off excluding the lights (Standby on)
4-
[
]
/(Enter):
Press and release, displays the alarms and opens sub menus
(if any). When you press for 5 seconds, opens programming menus. Approves the
commands.
Reduced SET / Economy LED
Permanently on:
Energy
Saving active
Flashing:
Reduced set active
Quick flashing:
Access to level2
parameters
Off:
Otherwise
Fans LED
Permanently on:
Fans active
Off:
Otherwise
Compressor LED
Permanently on:
Compressor active
Flashing:
Delay, protection or activati-
on blocked
Off:
Otherwise
Alarms LED
Permanently on:
alarm active
Flashing:
alarm acknowledged
Off:
otherwise
Aux LED
Permanently on:
Aux output active
Flashing:
Deep cooling Cycle active
Off:
Aux output not active
°F LED
Permanently on:
°F setting
(dro = 1)
Off:
otherwise
°C LED
Permanently on:
°C setting (dro = 0)
Off:
otherwise
Set Temperature
To display the Setpoint value press the [
] key when the 'SEt' label is
displayed. The Setpoint value appears on the display. Please again press the [
].
To change the Setpoint value, press the [
] and [
] keys within 15 seconds. Press
[
]to confirm the modification. Press the[
] key to exit setting.
