UGREEN CM335, Manual

Page: 10 / 24

8
Switching for the first time
Ugreen SPAN SCSI Disk Device
Device Manager
1. Select an array mode based on "RAID Modes & DIP Switch", and adjust the DIP switch "1/2" respectively.
2. Press and Hold "RESET" for 10 seconds then release the button. The mode change succeeds if the drive indicator flashes white.
3. Go to "This PC"> "Manage" > "Computer management" > "Device manager", then check the current RAID mode.
3 Drive Partitioning and Formatting
Windows
Online drive and drive partitioning after switching RAID mode. The formatting may differ depending on the different operating system,
please check your operating system for reference.
Online drive: connect the hard drive to PC/laptop . Go to "This PC" > "Manage" > "Storage" > "Disk Management" and select the correct hard
drive to "Initialize Disk".
Warning
It is recommended that you use a brand new hard drive of the same capacity.
If you use an old hard drive, please format it before switching the RAID mode, and back up all of your important data.
The default mode of the product is PM mode.
2 Switch RAID Modes
Initialize Disk
·
·
·
①