UGREEN CM335, Manual

Page: 8 / 24

3 Put Drive Tray Back Into the Enclosure
Pins
2.2 2.5-inch Hard Drive
1
2
3
Pins of the hard drive face down.
Put the 2.5-inch hard drive on the drive tray.
Flip the tray over and make sure that the four holes of hard drive align with
those of the tray, then screw the hard drive firmly.
As the following picture, remove one of the plates first.
Put the drive tray back into the enclosure,
then slowly push it to the SATA port.
Do not unplug the hard drive when the device is powered on, please follow the steps below:
① Safely eject the hard drive from your PC/laptop
② Turn the device off and take out the hard drive.
Warning
6